×

Author: Sogec

SOGEC Pipeline Casing Protection VCI

HOW THE PIPE CASING SOLUTION WORKS

High Viscosity Gel Application

WHEN: For pipelines with a metallic short (i.e., casing in contact with the carrier pipe) or pipelines where a static fill anti-corrosion solution is needed. This also meets PHMSA requirements for a protection system that remains in place.

HOW: The gel system is installed as a low viscosity slurry which sets up as a high viscosity gel. The VCI molecules volatize from the gel to protect the vapor spaces in the annulus. The SCI in the product neutralizes contaminants on contact. The gel system has advantages over the other two applications in that, as the gel sets up, it can bridge small penetrations and reduce the possibility of the solution leaking out of the casing. Conversely, it helps slow down the ingress of contaminants from the outside.


Powder Application

WHEN: For pipelines without a metallic short, but for which providing internal corrosion protection is a good operating procedure, Zerust recommends the use of its dry powder inhibitor. If there is minimal water ingress (i.e., end seal integrity is maintained) the system will protect the carrier pipe from corrosion.

HOW: A simple blower system is used to blow Zerust’s proven blend of Zerion powder inhibitors down into the pipe casing through the casing vent pipes. The Zerion powder is blown down the entire length of the annulus and settles on the bottom of the casing pipe. SCIs neutralize contaminants in the bottom while VCI volatizes to protect the metal surfaces in the vapor space. The entire annular space of the cased pipeline is protected.

More…

Join Sogec at the Asset Integrity and Process Safety Conference & Exhibition

We are excited to announce that Sogec will be participating in the highly anticipated 2nd Asset Integrity and Process Safety Conference & Exhibition 2024 in Jubail. As a leading provider of asset integrity solutions, we are honored to be part of this prestigious event dedicated to promoting safety and excellence in the industry.

More…

Saudi Aramco Students Visit Our Dammam Manufacturing Facility

We are excited to share some exciting news regarding our recent collaboration with Aramco CSD. As part of our ongoing commitment to sharing knowledge and fostering professional growth, we had the privilege of hosting a session on cathodic protection systems and materials at our state-of-the-art manufacturing facility in Dammam.

More…

SOGEC Brings Innovative Solutions To 18TH MECC In Bahrain November 2023

We are delighted to share an exciting event that took place recently at the 18th MECC Exhibition. It was an honor to welcome esteemed guests, the Minister of Oil and Environment of the Kingdom of Bahrain, Dr. Mohamed bin Mubarak bin Daina, and ARAMCO’s Executive Vice President Technical Services, Mr. Wail A. Al Jaafari, to our SOGEC booth.

More…

About Us

SOGEC – Specialized Oil & Gas Engineering Company is a part of KABBANI CONSTRUCTION GROUP which was established in 1979 and commenced its activities as a specialized maintenance contractor, then it grew steadily over the past 30 years to become consistently rated among the largest 50 companies in Saudi Arabia.

Send a mail

    Contact Us

    • +966138923777

    • +966138144849

    • sogec@ikkgroup.com

    • P.O. Box 9897 Dammam 31452,