×

Advanced Non-Destructive Testing (ANDT)

section-a37cb5c

Advanced Non-Destructive Testing

At SOGEC, we understand the critical importance of maintaining the integrity and safety of your assets. Through our advanced non-destructive testing (NDT) solutions, we can provide you with the technical assurance you need to confidently comply with all applicable standards, without compromising the condition of your equipment.

section-42b9e22

A wide Range of Advanced Non Destructive Testing Services

A Phased Array generates an ultrasonic beam with the capability of setting beam parameters. Applications include weld  inspection, complex geometries, defect detection, and location and sizing. The ability to record weld scans and to visualize the reflectors and their position within the weld makes it a qualified technology and an excellent choice for projects constructed to Various National & International Codes.

Time-of-flight diffraction (TOFD) method of ultrasonic testing is a sensitive and accurate method for the non destructive testing of welds for defects. 

SOGEC provides complete tube inspection services. This advanced tube inspection system has bundled five inspection technologies into a single unit.  ECT, MFL, RFT, NFT & IRIS. Advanced Tubing Inspection NDT methods for boiler & heat exchanger equipment in the petrochemicals industry to supplement major turnaround inspections.

The usual means of examination is to insert some type of probe into the tubes, one at a time, while data is recorded for later interpretation. The technologies listed below ( ECT, RFT, IRIS and MFL ) are all able to detect defects on the out side of the tube from inside.

Magnetic Flux Leakage (MFL) uses a powerful magnet to magnetize the conductive material under test (usually steel). Where there are defects — corrosion or material loss — the magnetic field “leaks” from the steel.

MFL probes incorporate a magnetic detector placed between the poles of the magnet where it can detect the leakage field. During the inspection, a magnetic circuit of sorts forms between the part and the probe. The magnetic field induced in the part saturates it until it can no longer hold any more flux. The flux overflows and leaks out of the pipe wall and strategically placed sensors can accurately measure the three-dimensional vector of the leakage field.

SOGEC Advanced NDT Solutions provides a comprehensive Borescope Inspection Service. The borescope is an essential tool for inspecting of power plant components. Commonly used in high-value rotating power-plant equipment such as steam turbines, gas turbines and generators it is also extremely useful for checking the internal or to reach external surfaces of boiler and HRSG tubes and piping.

Corrosion mapping is a quantitative way to inspect a material where oxidation or erosion has reduced its thickness.
Variations in material thickness due to corrosion can be identified and graphically portrayed as an image. The technique is widely used in the oil and gas industries for the in-service detection and characterization of corrosion in pipes and vessels. The data is stored on a computer and may be color coded to show differences in thickness readings.

section-e0e4764

Minimize Risk with SOGEC's Advanced NDT Solutions

At SOGEC, we understand the critical importance of maintaining the integrity and safety of your assets. Through our advanced non-destructive testing (NDT) solutions, we can provide you with the technical assurance you need to confidently comply with all applicable standards, without compromising the condition of your equipment.

section-362fccf

Cost and Time-Saving Advantages

Unlike traditional destructive testing methods, NDT offers a more efficient and cost-effective approach to product evaluations, asset management, and fault identification and repair. By preserving the integrity of your assets, you can enjoy significant savings in both time and resources, allowing you to focus on driving your business forward.

Cost and Time-Saving Advantages

Unlike traditional destructive testing methods, NDT offers a more efficient and cost-effective approach to product evaluations, asset management, and fault identification and repair. By preserving the integrity of your assets, you can enjoy significant savings in both time and resources, allowing you to focus on driving your business forward.

About Us

SOGEC – Specialized Oil & Gas Engineering Company is a part of KABBANI CONSTRUCTION GROUP which was established in 1979 and commenced its activities as a specialized maintenance contractor, then it grew steadily over the past 30 years to become consistently rated among the largest 50 companies in Saudi Arabia.

Send a mail

    Contact Us

    • +966138923777

    • +966138144849

    • sogec@ikkgroup.com

    • P.O. Box 9897 Dammam 31452,